Sunday, November 7, 2010

Re: [MW:8125] Regarding Titanium welding

i)what is the joint configuration of t/tsht joint
ii) Do you require to weld with filler with two passes or use with single pass using fusion of tube metal
iii) Is it with manual weld or machine weld
iv) It is always preffered to use pulsed tig with inverter base welding m/c where you can control with lower voltage
v) Imprtant aspect is of shielding by argon gas  of weld metal with trailing facilty/integral hood  fixture connected to torch head /using bigger size shielding cup to avoid overheating of surrounding of weld including of base
vi) Current used for 0.8 mm tube size is about 90-100 A 10-12 V with Gas flow of 15-20LPM
ou need to qualify the mock up having weld with out oxidation
 
Regards
 
Hegde


From: cyril andrews <jcyrilandrew@gmail.com>
To: materials-welding@googlegroups.com
Sent: Sat, 6 November, 2010 10:18:23 PM
Subject: [MW:8115] Regarding Titanium welding

 

Dear All,

        I have already post this question to you all, again I am making a remainder. I am in need of a sample WPS and PQR for Titanium welding . Consider the tube material SB 338 and grade 2 and the tube sheet is SB 265. I want to weld seal welding (tube to tubesheet) in GTAW process. Please if anyone have it please forward , it will be very much useful to me. Thanks .

 

Regards,

J.C.Andrews,

QA/QC Engineer,

Doha-Qatar.

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...