Sunday, November 7, 2010

Re: [MW:8118] Coating

Haseeb,
 
Can you more specific on your requirements, which code you referred, and what it is mentioning, and what does your client specification says.
 
regards,
 
Arun S Das
Inspection Engineer
Velosi Certification LLC
Qatar
Mob: +97433240549
+919847051202 ( India )



From: haseeb ph <haseebph@gmail.com>
To: Materials & Welding <materials-welding@googlegroups.com>
Sent: Sat, 6 November, 2010 9:04:55 PM
Subject: [MW:8114] Coating

dear sirs,

one of my client asking salt contamination level 20mg/m2,but the paint
system they are using is exposed atmospheric service.and code saying
much higher range than this . please advice

Haseeb
KSA

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...