Re: [MW:8106] blasting and painting

mr. srinivas

as far as i know there is no prob to paint at night,make sure that the
steel temp is min 3 degree celsius greater than the dew point and
relative humidity less than 80%(For inborganic Zinc RH can go upto
85%)this detail you can veryfy in SSPC/NACE/BGas, this is the common
requirement of painting & blasting activities

thanks & Regards
Haseeb
KSA
On 11/5/10, Harish Kannepalli <harishkannepalli@gmail.com> wrote:
> Dear Mr. Srinivas,
> Better to do it during day time as there is no
> possibility of dew. Contact ur paint manufacturer for painting conditions
> and proceed at night also.
>
> 2010/11/4 srinivas rao <ksrvasu@gmail.com>
>
>> Dear All,
>>
>> Can we allow blasting and painting in the night?
>> If no, pls let me know why.
>>
>>
>> Thanks and Regards,
>>
>> srinivas
>>
>> --
>> To post to this group, send email to materials-welding@googlegroups.com
>> To unsubscribe from this group, send email to
>> materials-welding+unsubscribe@googlegroups.com<materials-welding%2Bunsubscribe@googlegroups.com>
>> For more options, visit this group's bolg at
>> http://materials-welding.blogspot.com/
>> The views expressed/exchnaged in this group are members personel views and
>> meant for educational purposes only, Users must take their own decisions
>> w.r.t. applicable code/standard/contract documents.
>>
>
>
>
> --
> regards,
> Harish.
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.