Hi, Check Sec.II Part - C for corresponding consumable specification and test requirements.If Part-C require PWHT for your consumable then the consumable manufacturer should be done and shown on the MTC.
Thanks & Regards,
(Karthik)
Karthikeyan.S QA/QC Manager Getabec Energy Co.,Ltd. 379,Moo6,Soi8,Nikhomphatana, Rayong-21180, Thailand. Phone: 0066 38 897035-8 (Off) Fax: 0066 38 897034 Hand Phone: 0066 892512282
--- On Wed, 11/3/10, limesh M <limesh78@gmail.com> wrote:
From: limesh M <limesh78@gmail.com> Subject: [MW:8031] Consumable MTC Review To: "Materials & Welding" <materials-welding@googlegroups.com> Date: Wednesday, November 3, 2010, 2:19 PM
Dear All, Design Code- ASME B31.3 Welding Code - ASME SEC IX Process - GTAW+SMAW I have a WPS which is qualified with PWHT and impact test.Now I have to review some consumable MTC.I need advise on the following queries. 1.Is it mandatory that the consumable MTC shall show the mechanical test values with PWHT for acceptance ? 2.Can I accept consumable MTC which is matching with corresponding SFA and material properties with out PWHT? Regards, Limesh -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment