Wednesday, November 3, 2010

Re: [MW:8022] RT of longitudinal seam

Hi,
this is applicable for longitudinal seam pipe and circuferential girth generally what we doing.
what  about when both side longitudinal seam are intersecting without maitain mim distance, at that  RT is applicable to take 38mm both side or we have to maintain that nominal distance at any cost.
attached B31.3 341
also
thanks and regards
Sujay


 
On Tue, Nov 2, 2010 at 5:51 PM, AGUSTIN JIMENEZ <agumarca@yahoo.com> wrote:
HI.
IF YOU USED 70 MM FILM AND PUT SEAM IN CENTER FILM, YOU HAVE APROXIMITLY MORE O LESS 38 MM OF INTERSECTION.
 
AGUSTIN 


De: sujay kumar <sujay1199@gmail.com>
Para: materials-welding@googlegroups.com
Enviado: mar, noviembre 2, 2010 4:06:45 AM
Asunto: [MW:8012] RT of longitudinal seam

Dear Friends,
 
 Having doubt ,when longitudinal seam an intersecting with circuferential seam,Taking RT of circumferential full girth 100%, is acceptable or have to take 38mm of longitudinal seam  an intersecting point and reference is B31.3 cl341.4.1

The welds to be examined shall be selected to

ensure that the work product of each welder or welding

operator doing the productionwelding is included. They

shall also be selected to maximize coverage of intersections

with longitudinal joints. When a circumferential

weld with an intersecting longitudinal weld(s) is examined,

at least the adjacent 38 mm (1

12 in.) of each intersecting

weld shall be examined.

 

thanks and regards

Sujay

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...