There is no welding process for GRP. The joint is made by overlay of laminate.ie by reinforcing resin with fiberglass mat. Refer BS 4994 or ASME section X for further reading.
Regards
Hrishi
Sent on my BlackBerry® from Vodafone
-----Original Message-----
From: Baiju nair <nairbaiju@ymail.com>
Sender: materials-welding@googlegroups.com
Date: Mon, 1 Nov 2010 09:14:57
To: Materials & Welding<materials-welding@googlegroups.com>
Reply-To: materials-welding@googlegroups.com
Subject: [MW:0] grp welding process
Dear Sir,
I want to know about grp welding process.
with Regards,
Baiju s nair.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment