Monday, November 1, 2010

Re: [MW:7987] R/F Pad plate thickness

May creat distortion issues, need to be carfull when wleding.

Regards


On Mon, 01 Nov 2010 11:41:22 +0530 wrote
>Dear All,
>
>Situation:
>Dished head nominal thk.8mm / Minimum thk.6mm
>Shell thk.6mm
>Code of construction: ASME Sec.VIII Div.I
>
>Is it acceptable to use 10mm thk R/F pad plate (due to non availability of lesser thk plate)for a nozzle suppose to be welded on above mentioned dished head...?
>
>Regards,
>Manohar.
>




--
>
To post to this group, send email to materials-welding@googlegroups.com
>
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>


Chandra Bhusan Tripathi
23 Beckett Circle
Perth, WA
Australia
M +61422812970
H +61862012197

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...