Monday, November 1, 2010

[MW:7980] R/F Pad plate thickness

Dear All,

Situation: 
Dished head nominal thk.8mm / Minimum thk.6mm
Shell thk.6mm
Code of construction: ASME Sec.VIII Div.I

Is it acceptable to use 10mm thk R/F pad plate (due to non availability of lesser thk plate) for a nozzle suppose to be welded on above mentioned dished head...?

Regards,
Manohar.
 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...