Thursday, October 28, 2010

Re: [MW:7906] About electrode

coating is shielding to the rodin SMAW,in GTAW and SAW flux and gas are using as sheild.
thanks and regards
Sujay

On Thu, Oct 28, 2010 at 10:21 AM, VIshal Sapkale <sapkalevishalv@gmail.com> wrote:
Dear all,


i hv simple que.

we used coated electrode for SMAW so why don't we use coated filler wire for SAW & GTAW


Regards,
VIshal

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...