Wednesday, October 27, 2010

RE: [MW:7848] WQT-Visual Acceptance Criteria Issue

QW302.4, QW194

“Performance test coupons shall show complete joint penetration with complete fusion of weld metal and base metal”.

 

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of limesh M
Sent: Wednesday, October 27, 2010 10:03 AM
To: Materials & Welding
Subject: [MW:7847] WQT-Visual Acceptance Criteria Issue

 

Dear All,

 

Design Code - ASME B31.3

Welding Code - ASME BPV SEC IX

 

I want to qualify some welders and welding operators based on ASME BPV SEC IX.

What is the visual acceptance criteria as per code (Suppose there is no client specification regarding this matter)?

Please mention the relevant code clauses for reference.

 

 

Regards,

 

 

Limesh


By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:34874] ASME IX, groove weld during WQT limits for Fillet Weld production

Hi David,  There are two points in WQT. 1. Thickness of Base Metal -T 2. Thickness of Weld Metal -t When you use a combination of two proces...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...