Tuesday, October 26, 2010

Re: [MW:7804] Deletion of filler metal in WPS ASME IX

Hi,
You cannot use.As per QW256 and QW404.14 deletion or addition of filler metal is an essential variable.You have to prepare new WPS with supporting PQR.
 
Thanks & Regards,
 
(Karthik)

Karthikeyan.S
QA/QC Manager
Getabec Energy Co.,Ltd.
379,Moo6,Soi8,Nikhomphatana,
Rayong-21180,
Thailand.
Phone: 0066 38 897035-8 (Off)
Fax: 0066 38 897034
Hand Phone: 0066 892512282


--- On Tue, 10/26/10, César Alexis Viteri Pérez <alexis_viteri@hotmail.com> wrote:

From: César Alexis Viteri Pérez <alexis_viteri@hotmail.com>
Subject: [MW:7799] Deletion of filler metal in WPS ASME IX
To: materials-welding@googlegroups.com
Date: Tuesday, October 26, 2010, 5:41 AM

 

Dear members,

 

CASE 1:  GTAW , WT QUALIFIED 1/8" – 5/16", WITH FILLER METAL, groove V joint

CASE 2: GTAW, WT 1/16" , NO FILLER METAL , buttweld

 

Could you please give your opinión regarding this issue:

There is a PQR approved by ASME IX for case 1, is suitable use that PQR for support a new  WPS in order to weld as described in case 2?

 

Thanks and regards

AV

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...