Hi, As per B31.3 Table 341.3.2 Thanks & regards, (Karthik)
Karthikeyan.S QA/QC Manager Getabec Energy Co.,Ltd. 379,Moo6,Soi8,Nikhomphatana, Rayong-21180, Thailand. Phone: 0066 38 897035-8 (Off) Fax: 0066 38 897034 Hand Phone: 0066 892512282
--- On Mon, 10/25/10, KASHKOUSHA <kashkousha1@yahoo.com> wrote: From: KASHKOUSHA <kashkousha1@yahoo.com> Subject: Re: [MW:7791] EXCESS PENETRATION To: materials-welding@googlegroups.com Date: Monday, October 25, 2010, 9:10 PM
Dear P.Mahendran thanks for prompt reply but what clause no in b31.3 H.KASHKOUSHA
From: mahendran p <pmahe_79@yahoo.co.in> To: materials-welding@googlegroups.com Sent: Mon, October 25, 2010 3:15:07 PM Subject: Re: [MW:7788] EXCESS PENETRATION Dear Kashkousa, Its depends on the wall thickness. for Example, if wall thk is <=6 mm then EP is 1.5mm >6 < =13mm the EP is 3 mm Thk & rgds, P.Mahendran --- On Mon, 25/10/10, KASHKOUSHA <kashkousha1@yahoo.com> wrote:
From: KASHKOUSHA <kashkousha1@yahoo.com> Subject: [MW:7784] EXCESS PENETRATION To: materials-welding@googlegroups.com Date: Monday, 25 October, 2010, 6:17 PM
dear all what is the acceptance criteria of excess penetration in ASME B31.3 THANKS H.KASHKOUSHA -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
| -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment