Re: [MW:7791] EXCESS PENETRATION

 Dear P.Mahendran

thanks for prompt reply but what clause no in b31.3
 

H.KASHKOUSHA

---

From: mahendran p <pmahe_79@yahoo.co.in>
To: materials-welding@googlegroups.com
Sent: Mon, October 25, 2010 3:15:07 PM
Subject: Re: [MW:7788] EXCESS PENETRATION

Dear Kashkousa,                          Its depends on the wall thickness.   for Example, if wall thk is <=6 mm   then EP is 1.5mm >6 < =13mm the EP is 3 mm     Thk & rgds, P.Mahendran   --- On Mon, 25/10/10, KASHKOUSHA <kashkousha1@yahoo.com> wrote: From: KASHKOUSHA <kashkousha1@yahoo.com> Subject: [MW:7784] EXCESS PENETRATION To: materials-welding@googlegroups.com Date: Monday, 25 October, 2010, 6:17 PM dear all what is the acceptance criteria of excess penetration in ASME B31.3 THANKS  H.KASHKOUSHA -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.