Friday, October 22, 2010

RE: [MW:7715] DIFFERENCE BETWEEN PIPE AND TUBE

Hi Pravez,

I can't see the difference, you need to be specific. Where does the NB or NPS come in and pipe schedules?

Assain

-----Original Message-----
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Rajpal Dhillon
Sent: 22 October 2010 06:57
To: materials-welding@googlegroups.com
Subject: Re: [MW:7710] DIFFERENCE BETWEEN PIPE AND TUBE

Difference between pipe and tube is that in case of pipe OD is fixed
and ID will change as thickness changes but in case of tube ID is
fixed OD will change as the thickness changes.

On 10/21/10, pravez alam <alampravez@gmail.com> wrote:
> Any one can explain what the real difference between pipe and tube.
>
> --
> Pravez Alam
> Doha Qatar
> Mob#+9746813248
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding-unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>


--
Rajpal Singh Dhillon
Punjlloyd Limited
DJPL Project BHAVNAGAR
Mob:9510520370,9228293864

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.


--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...