Tuesday, October 12, 2010

Re: [MW:7501] Machining

Dear Mr.Abdul...
 
For flanges please refer B 16.5 cl.6
 
For fittings please refer B 16.9 cl. 11
 
br,
msms

On Mon, Oct 11, 2010 at 6:21 PM, Abdul Wajid <abdulwajidkazi@gmail.com> wrote:
Dear Sir

I would like to know, Is machining accepted for flanges and fittings?
Such as schedule change by enlarging the bore, Flat face,
In case it is accepted please provide the standard reference


Regards,
Abdul Wajid

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...