because of the unavailaibily of Baking/ Holding OVENS required for E7018 and this electrodes(E 6010) will be used for structural work.On Thu, Oct 7, 2010 at 10:59 AM, Bathula Raghuram (Mumbai - PIPING) <R.Bathula@ticb.com> wrote:
You can, But why do you want to use E6010 for fillet?
Fillet welds when made with E6010 usually have a relatively flat weld face and have a rather coarse, unevenly spaced ripple.
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Karthik
Sent: Thursday, October 07, 2010 1:17 PM Subject: Re: [MW:7414] use of E 6010 for fillet weld
Hi,
Yes.You can use.
QW-451.4
FILLET WELDS QUALIFIED BY GROOVE-WELD TESTS
Thickness T of Test
Coupon (Plate or Pipe) Type and Number of Tests
as Welded Range Qualified Required
All groove tests All fillet sizes on all base Fillet welds are qualified when
metal thicknesses and all the groove weld is qualified
diameters in accordance with either QW-451.1 or QW-451.2
Thanks & Regards,
(Karthik)
Karthikeyan.S
QA/QC Manager
Getabec Energy Co.,Ltd.
379,Moo6,Soi8,Nikhomphatana,
Rayong-21180,
Thailand.
Phone: 0066 38 897035-8 (Off)
Fax: 0066 38 897034
Hand Phone: 0066 892512282
--- On Thu, 10/7/10, asad azmi <azmiasadayub@gmail.com> wrote:
From: asad azmi <azmiasadayub@gmail.com>
Subject: [MW:7412] use of E 6010 for fillet weld
To: materials-welding@googlegroups.com
Date: Thursday, October 7, 2010, 1:38 PMDear All
Good Day.
I have WPS which was qualified using E6010 for Root pass and rest welding with E7018 for P1 Material of thickness 10mm.
Please inform me whether I can use above WPS for welding fillet weld of 10 mm for P1( SA 36) material using E6010 Electrode.
Thanks in advance for your valuable suggestions.
Best Regards
Asad Azmi
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment