Hi Eduardo,
I understand that you make a ht, you must perform the calculations as indicated in API RECOMMENDED PRACTICE 2201.
Your wps may be applicable to the type of joint requerimietnos, base material, etc.
To your second question, yes, clear the considerations that you recommended API noted above.
Kind Regards,,
A. Gustavo Mendoza
oct 4, 2010 03:20:12 AM, materials-welding@googlegroups.com wrote:
===========================================
Can anybody tell me which are the variables to take in account in order to qualify a WPS for hot tap?, I mean, is it just diameter, thickness, material spec., ?, or do I have to take account temperature, flow, fliud characteristics?
Another question is: Can I use a old WPS for HT used in other projects?
Eduardo Calva
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Subscribe to:
Post Comments (Atom)
Re: [MW:34913] Filler wire
E71T-1C is Charpy Impact tested at -20degC E71T-1CJ is Charpy impact tested at -40degC. AWS Classification for FCAW is only a supplementary...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment