Dear Hegde,
You can see all electrodes pockets they marked baking temperature and duration. Sec II c also refered manufacturer recommendations.
arvinda.
On Mon, Oct 4, 2010 at 7:57 PM, <hegde.pb@isgec.com> wrote:
Generaly SS. Electrodes are recomended to bake at 250 c for 1.5 to 2 hrs and hold at 100. C till being issued to welder . Higher baking temp. Say 300 c causes problm of peelng of flux coatinhg
Regards
HegdeSent from my BlackBerry® smartphone from !DEA
From: arvinda shan <arvindashan@gmail.com>Date: Mon, 4 Oct 2010 17:47:36 +0400ReplyTo: materials-welding@googlegroups.comSubject: Re: [MW:7359] Unable to find Oven Baking Temp in ASME SEC 2 C for E 309 L - 15--manufacturer recommendation baking temperature to be followed.arvinda.On Mon, Oct 4, 2010 at 4:57 PM, Engineer Mech <mengineer010@gmail.com> wrote:
Dear All
I want to know baking temp of E 309 L - 15,
I checked out in SFA 5.4 in ASME sec 2 C,
Pl let me.. wat it is?
Thanks
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com--
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment