Friday, October 1, 2010

Re: [MW:7299] HEAT & LOT NO

Heat No: means, while melting the Mech & Chemical properties are to be tested.
Lot No : Product analysis, it means after made a shape like plate, structrals, or any oyher forms,the Mech & Chemical properties are to be tested.( it can be tested per lot diffrent amount of tensile,bent,impact & other mechanical requirements to be carried out as per standard.
 

175, R.Kesavamoorthi,

Principal surveyor,

Quest (pvt.) Ltd.,

Ranipet.




From: Bhuvan Easwari <vkbhuvan@gmail.com>
To: materials-welding@googlegroups.com
Sent: Thu, 30 September, 2010 8:25:44 PM
Subject: [MW:7293] HEAT & LOT NO

Dear friends,

 What is Heat No. and Lot No.

Thanks and regards
VK.Bhuvan

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...