Dear Aslam,
Yes there is a remote control switch for X ray generator for some models especially the portable ones.
You need really to have a very good shielding aside from enclosing the area for a safe radial distance during X Ray operation. The best shielding is if you are able to have a chamber designed to enclose the area for the intened KVp or gamma source that you plan to use.
Thanks.
PJA
-----Original Message-----
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of tafi
Sent: Tuesday, October 26, 2010 6:08 AM
To: Materials & Welding
Subject: [MW:7816] Re: is there any method by which we can strat RT BY REMOTE CONTROL SYSTEM ?
Dear Aslam khan,
You can do RT with X ray machine which have the system of safe
elapsing time.You canadjust the paramerers and switch on the
machine .The exposure will on after a pre set time of few minutes and
during that time the RT technician can be at a safe distance.
Thanks and regards,
MUHAMMAD TUFAIL
On Oct 25, 5:02 pm, aslam khan <aslamkha...@gmail.com> wrote:
> hi friends ,
> we strat RT to move crankshaft manually .is there any method by which
> we start RT BY REMOTE CONTROL SYSTEM FOR SAFTETY OF RT
> TECHNICIANS?THANKS
>
> REGARDS
> M.ASLAM KHAN
> QA/QC ENGINEER
> DESCON ENGINEERING LTD.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment