Thursday, October 21, 2010

[MW:7672] Regarding Seam in Piping

Dear All,

I Want to know that seam to seam is not allowed during fit-up or
welding of Piping as per 31.3
but today i had observed 16" A312 SCH10S same elbow to elbow fit-up in
up direction we have to done fit-up but it comes seam to seam other
way is not possible.

can u suggest me regarding this issue.

Shaikh Ahmed
QA/QC engineer.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...