Dear All,
I need your help. I have to review one MTC of material BSEN 10025: 2004 S275JR+AR.
Material Size – 152.0 X 152.0 X30.0 (All dimension are in mm)
I have reviewed EN10025-2 and found thecooresponding grade S275JR.But I couldn't find any S275JR+AR in that standard.
In this case what I have to do, Can I accept or reject the MTC?
Furthermore, in the MTC, it has been mentioned that, required minimum value of Yield, Tensile and Impact are 275 Mpa, 410 Mpa, and 27 Joules. Again I reviewed corresponding standard (EN10025-2, 2004) and found that in table 7 (Mechanical properties at ambient temperature for flat and long products of steel grades and qualities with values for the impact strength), thickness >16mm and ≤40mm, 265 Mpa is acceptable. As per my understanding if the thickness of material is above 16 mm and below or equal to 40 mm, 265 Mpas is acceptable.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment