We are going to use Alloy 20 tubes in a heat exchanger,we will expand approx 200 mm length into grooves and then seal weld.
We have been told expansion is difficult, has anyone had any experience of this procedure.
John Hardcastle |
Fabrication Manager |
Euro Mechanical Contractors Company Factory |
P.O. Box 46153 Abu Dhabi United Arab Emirates |
Phone: +971 2 550 08 99 |
Fax: +971 2 5501898 |
Mobile: +971 50 4445873 |
Email: jhardcastle@euromechanical.com |
www.euromechanical.com |
This email is intended for the addressee(s) only, and may contain confidential or privileged information. Unauthorised use of this information, or distribution, copying or other dissemination is strictly prohibited.
If you have received this email in error, please destroy it immediately.
--To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment