Tuesday, October 5, 2010

[MW:7380] Inspection of Beams and Channels

Dear All,

We are going to carry out inspection of Beams, Columns and Channel
which is 20 years old. What are the things we want to carry out during
inspection? If it is corroded means what is the allowance of corrosion
as per standard? What standard we can follow for inspection? What is
the minimum distance of butt joint on Beams and columns ?

Kindly help me, I need all of your inputs.

Thanks in advance.

Regards,
Vijay.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...