Friday, October 1, 2010

[MW:7316] Electrode for cast steel

hi Larry 
for cast steel (except creep resistance  and high alloy steels) you can very well use E7018 type of electrodes without any problem
Heat the job up to 250 0C 
weld with 7018  do not allow the inter pas temp within 250 to 300  0 C electrodes should be  redryed up to 150 0C 
for creep resistance steel 8018 or 9018G will worbetter


--
Regards
S.B. Badami
RMS Engineering
11/1 Shanti Nagar Bhosari
cell no +919850920429
+912027127939
visit us at www.indiamart.com/rmsengineering/

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...