Re: Re: [MW:6898] Is it possible to use a fitting with all same specification but only difference in class?

yes but fitting should be of higher class than mentioned in PMS.




On Sun, 05 Sep 2010 15:41:09 +0530 wrote
>no, consult your designer, stress values will vary. 

On Sun, Sep 5, 2010 at 11:33 AM, navaneeth r wrote:

Is it possible to use a fitting with all same specification but only difference in class?
 
Regards,
 
Navin
Doha,Qatar








--
>
To post to this group, send email to materials-welding@googlegroups.com
>
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
>
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.