Wednesday, September 29, 2010

Re: [MW:7258] raw material

Hi,
If the construction code is ASME,Then refer with ASME Sec.-II Part-A for the applicable raw material and the applicable construction code.
 
Thanks & Regards,
 
(Karthik)

Karthikeyan.S
QA/QC Manager
Getabec Energy Co.,Ltd.
379,Moo6,Soi8,Nikhomphatana,
Rayong-21180,
Thailand.
Phone: 0066 38 897035-8 (Off)
Fax: 0066 38 897034
Hand Phone: 0066 892512282


--- On Tue, 9/28/10, Bhuvan Easwari <vkbhuvan@gmail.com> wrote:

From: Bhuvan Easwari <vkbhuvan@gmail.com>
Subject: [MW:7255] raw material
To: materials-welding@googlegroups.com
Date: Tuesday, September 28, 2010, 9:18 PM

Dear sir,
During raw material verification what are the points to be inspected and if you noticed any surface irregularities which code you have to refer for acceptance/ not acceptance? Please clear my doubts.
Thanks and regards
VK.Bhuvan
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...