Tuesday, September 28, 2010

Re: [MW:7252] WQT based on AWS D1.1

Hello,

You can qualify you welder with Single "V" or Double "V".
For single"V"-with or without backing of weld material you can qualify,it qualifies with or without backings Weld materials.
For Double " V" with back chip & weld material definitely requires,it qualifies with or without backings of Weld materials.
 

175, R.Kesavamoorthi,

Principal surveyor,

Quest (pvt.) Ltd.,

Ranipet.




From: limesh M <limesh78@gmail.com>
To: Materials & Welding <materials-welding@googlegroups.com>
Sent: Tue, 28 September, 2010 3:16:45 PM
Subject: [MW:7244] WQT based on AWS D1.1

Dear All,
 
I want to qualify welders based on AWS D1.1 for ordinary structural steel work.Is it one sided welding(complete penetration) like pipe with out backchipping or partial penetration welding or welding both side after backchipping?I don't know which method I have to follow.
 
Regards,
 
Limesh

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...