Tuesday, September 28, 2010

Re: [MW:7241] Flange Modification

it can be possible but whether u r going to carry out RT of butt weld between pipe & WNRF flange

On Tue, Sep 28, 2010 at 10:16 AM, Praveen Kumar <praveenkumar.sek@gmail.com> wrote:

 

Dear all,

 

As per Material Specification (PMS) provided the materials 4"#150 SORF & IS-1239 pipe but  In this material shortage it is possible to be placed 4" WNRF flange same class for Fire water service pie line, Which is acceptable as per standards. Pls. guide me in this issue.

 

 

Regards,

 

Praveen Kumar

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...