Re: [MW:7172] Wearing of plasite paint

Hi,

It might be happened due to poor surface preparation , while blasting
blasting not respected the parameters. skin temperature might less
than dew point or after more laps of time sweep blast not done before
painting.

solution only you have to re-blast properly and repaint.

On 9/23/10, Qamlr <qamlr@cicb-chemicon.com> wrote:
> Dear All
>
> We have received feed back from customer that HP & LP Shell of the
> compressor, have hade complete disintegration of plasite coating and
> excessive rust formation in the shell . An excessive plasite wearing has
> been noticed on the shell
>
> We have used plasite 7156 and conformed as per the specification called
> during painting in house
>
> Could experts give feed back for such failure and cause for the same?. We
> shall have to take corrective action
>
> Thanks
>
> Regards
>
> Prashanth Hegde
>
> ________________________________
> Please don't print this e-mail unless you really need to.
> *******************************************************************
> This e-mail is confidential. It may also be legally privileged. If you are
> not the addressee you may not copy, forward, disclose or use any part of it.
> If you have received this message in error, please delete it and all copies
> from your system and notify the sender immediately by return e-mail.
> Internet communications cannot be guaranteed to be timely, secure, error or
> virus-free. The sender does not accept liability for any errors or
> omissions.
> *******************************************************************
> "SAVE PAPER - THINK BEFORE YOU PRINT!"
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding-unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>

--
Dear

Thanking you.

With Warm Regards,

Muthu Barathi P
mobile : 09967300544
mobile: 09022848735

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.