Saturday, September 18, 2010

Re: [MW:7082] 15 Mo3

code of construction is SEC III Division 1 subdivision NB.
Repair depth up to 15-20 mm.
PWHT is required

On Sat, Sep 18, 2010 at 6:20 PM, Maulik H. Thakkar <mlkthakkar2@gmail.com> wrote:
Dear all,

Is it required to qualify the new PQR for simulated repair for the
15Mo3 # 20MnMoNi55 joint?
If yes/no whatever justified by proper evidence.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



--
REGARDS,
MAULIK H. THAKKAR
 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...