Monday, September 13, 2010

Re: [MW:6979] vacuum chamber

It mean 0.0000001 mbar vacuum required in chamber.


Regards,
Devang Patel | Sr. Manager Engineering
Inox India Ltd. | 4th Floor, ABS Tower, Old Padra Road, Vadodara. Guj.
India.
Voice: + 91-265-3056100 ext. 392 | Fax: +91-265-2341449 | Mobile: +91
9879803401
Email: devangp@inoxindia.com | web: www.inoxindia.com

----- Original Message -----
From: "Harish Kannepalli" <harishkannepalli@gmail.com>
To: <materials-welding@googlegroups.com>
Sent: Saturday, July 31, 2010 7:12 PM
Subject: Re: [MW:6226] vacuum chamber


> dear sir,plz elaborate ur requirements for 10-6 mbar.
>
> On 7/31/10, Devang Patel <devangp@inoxindia.com> wrote:
>> Does anybody have a technical information about Vacuum Chamber(1x10-6
>> mbar)?
>>
>> Regards,
>> Devang Patel | Sr. Manager Engineering
>> Inox India Ltd. | 4th Floor, ABS Tower, Old Padra Road, Vadodara. Guj.
>> India.
>> Voice: + 91-265-3056100 ext. 392 | Fax: +91-265-2341449 | Mobile: +91
>> 9879803401
>> Email: devangp@inoxindia.com | web: www.inoxindia.com
>>
>> --
>> To post to this group, send email to materials-welding@googlegroups.com
>> To unsubscribe from this group, send email to
>> materials-welding-unsubscribe@googlegroups.com
>> For more options, visit this group's bolg at
>> http://materials-welding.blogspot.com/
>> The views expressed/exchnaged in this group are members personel views
>> and
>> meant for educational purposes only, Users must take their own decisions
>> w.r.t. applicable code/standard/contract documents.
>>
>
>
> --
> K Harish Kumar, MTech
> Consultant for:
> Corrosion Metallurgy
> Failure Analysis Surface Coating
> Thin Films Vacuum Systems QMS.
>
> www.itindt.com
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding-unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...