Vanchi, Thanks. Please can you provide source for this data? Best regards, Shashank Vagal
--- On Sat, 11/9/10, Vanchinath S.A. <vanchinaths@gmail.com> wrote:
From: Vanchinath S.A. <vanchinaths@gmail.com> Subject: Re: [MW:6956] optimum Heat input To: materials-welding@googlegroups.com Date: Saturday, 11 September, 2010, 1:43 PM
control heat input of GTAW and SMAW to 1.6 KJ/mm, FCAW - 2KJ/mm and SAW- 2.5KJmm max vanchi On Sat, Sep 11, 2010 at 10:48 AM, Sreejith.Nair <fizzyshadow@gmail.com> wrote: Is it possible to predict the optimum heat input ( which can give max. impact value) for a given material considering filler material is of same composition of base metal.
-- - Sreejith Nair-
-- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment