Wednesday, September 8, 2010

RE: [MW:6925] Is ASME B 16.5 say about SCH(Schedule) or not?

B. 16.5 does not address the pipe schedule. Please refer to b 36.10 for determining Thicknesses and Inside Diameters of the butt-weld side of the weld-neck flange.

Regards,

Muhammad Ali

M.E. Mechanical, CSWIP 3.1,

Executive Engineer, Inspection

PAKISTAN REFINERY LIMITED

Korangi Creek, Karachi

 

P SAVE A TREE

Don't print this e-mail unless it's really necessary.
2% of world's paper consumption is contributed by the prints of e-mails going direct into the waste paper basket.




 
> Date: Wed, 8 Sep 2010 00:43:36 -0700
> Subject: [MW:6920] Is ASME B 16.5 say about SCH(Schedule) or not?
> From: mengineer010@gmail.com
> To: materials-welding@googlegroups.com
>
> Dear All,
>
> Could u pl tells about ASME B 16.5 deals about Schedule or not,?
>
> & I find the class in it, tats the pressure rating..
> If i having a flange which 6" #150 SCH 80?
> Where i can refer for thickness?
>
> Thanks
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
> For more options, visit this group's bolg at http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...