Monday, September 6, 2010

Re: [MW:6901] RE: COMPRESS & DRAFTER SOFTWARE

Dear Qamir

As we know there are two major software for Pressure vessel design Pvelite & Compress Both have their advantages and disadvantages.
One of the advantage of compress is it is intelligent. The deficiency summary given by compress gives you a reference of code paragraph through which you can trace and study the deficiency.Also Codeware provides you quick advice if a query has been raised by you.
One disadvantage of compress is it generates a very large Calculation report compared to Pvelite. There are few tools which are present in Pvelite but not present in compress like calculation for skirt access hole

We are presently using compress for P.V. Design. But the drafter is not a comfortable tool. The .VDP generated from Compress has multiple breaks when you open it in autocad. But if you wish to use only the drafter library through Autocad then it is good as it increases your efficiency.
 

Regards

Thaksen





From: Qamlr <qamlr@cicb-chemicon.com>
To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com>
Sent: Mon, 6 September, 2010 10:21:26 AM
Subject: [MW:6891] RE: COMPRESS & DRAFTER SOFTWARE

Dear Team Members

 

Could you please share with us the experience of design soft ware COMPRESS & DRAFTER ? Our company wants to go in for the same.

 

We would like to know feedback from team members

 

Thanks

 

Regards

 

Prashanth Hegde

Head Quality

CICB-Chemicon Pvt. Ltd



Please don't print this e-mail unless you really need to.
*******************************************************************
This e-mail is confidential. It may also be legally privileged. If you are not the addressee you may not copy, forward, disclose or use any part of it. If you have received this message in error, please delete it and all copies from your system and notify the sender immediately by return e-mail. Internet communications cannot be guaranteed to be timely, secure, error or virus-free. The sender does not accept liability for any errors or omissions.
*******************************************************************
"SAVE PAPER - THINK BEFORE YOU PRINT!"

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...