Monday, September 6, 2010

Re: [MW:6888] ultrasonic testing in raw material

Dear Kisan Gamane,
 
Lamination and crack  are the most probable defect occurs during rolling .
 
 
Thanks and best regards.
Manoj

On Mon, Sep 6, 2010 at 4:54 AM, Kisan Gamane <kisankrishna1506@gmail.com> wrote:
Dear all
Anybody can suggest for following request.
Which types defect may  probabaly occurs in rolling plate. so that I can able to select the probe type ( Normal or Angle) for ultrasonic testing in raw material

--
Kisan Gamane
 
ॐ सर्वे भवन्तु सुखिनः, सर्वे सन्तु  निरामयः
सर्वे  भद्राणि  पश्यन्तु, मा कश्चिद दुखभाग भवेत्.
May all be happy. May all enjoy health and freedom from disease.
May all have prosperity and good luck. May none suffer or fall on evil days.
++++

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...