Sunday, September 5, 2010

Re: [MW:6871] Is it possible to use a fitting with all same specification but only difference in class?

no, consult your designer, stress values will vary. 

On Sun, Sep 5, 2010 at 11:33 AM, navaneeth r <navaniz444@gmail.com> wrote:
Is it possible to use a fitting with all same specification but only difference in class?
 
Regards,
 
Navin
Doha,Qatar



--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...