Friday, September 3, 2010

RE: [MW:6837] Stabilized heat treatment

No cooling media required, after soaking remove insulation and let it cool in air.

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of subrata das
Sent: Friday, September 03, 2010 10:51 AM
To: materials-welding@googlegroups.com
Subject: [MW:6836] Stabilized heat treatment

 

Dear Members

What shall be the cooling media for Stabilized heat treatment for grades like SS321, SS347 etc. as per code it is only mentioned that soaking temp. 900 deg.C / soaking time 4 hours.

 

 

Regards

Subrata Das


No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...