Hi,
Need to repair "Keep Plate" which is found damaged at the tip.
Material: Nimonic 80A (2.4631;2.4952,ASTM B637)
Composition: Cr:18-21% ,Ti:1.8-2.7%,Al:1-1.8%,Co:2%,Balance:Ni
Can we repair the item ,using ERNiCrMo-3 / 2.4831?
Thanks & Regards
----------------------------
Narendra Gohil
Welding Engineer
QAFCO
Ph.00974-44228289(O)
Mo.00974-66044289
Email: ngohil@qafco.com.qa
ॐ सर्वे भवन्तु सुखिनः, सर्वे सन्तु निरामयः
सर्वे भद्राणि पश्यन्तु, मा कश्चिद दुखभाग भवेत्.
May all be happy. May all enjoy health and freedom from disease.
May all have prosperity and good luck. May none suffer or fall on evil days.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Subscribe to:
Post Comments (Atom)
[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.
Hello, Please see the response below. Regards. P. Goswami, P. Eng, IWE. From: materials-welding@googlegroups.com <materials-weld...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment