Tuesday, September 21, 2010

[MW:7125] 7010 for root pass

Gents,

 

Although 7010 & 6010 is good choice for welding X60 but what to do if root bend does not qualify. What about to have root, hot pass, fill and cap with 7010? Please comment.

 

Best Wishes

Aftab Ahmad

 

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...