Sunday, September 19, 2010

[MW:7084] ASME R STAMP

 

Dear All,

I'm going to make some Works inside of a dehydrator (please see attachment), the questions are:

  1. If I cut the angle suports without Couch the shell, do i need an R stamp company for mantain the ASME stamp?
  2. If I cut the angle suports and grinding the angle flush to shell, do i need an R company for mantain the ASME stamp?
  3. For cutting the existents excentric reducers as and Weld others, do i need an R company for mantain the ASME stamp?

 

Please escuse my language, i'm not native speaker (or writer :D )

Thank in advance for your cooperation.

 


 

Date: Sat, 18 Sep 2010 21:53:43 +0530
Subject: Re: [MW:7079] F-No&A-No of ERNiCrMo-3
From: raghurambathula@gmail.com
To: materials-welding@googlegroups.com

For ERNiCrMo-3 Fnumber is 43, please recheck WPS if they have specified some other filler such as NiFeCr-1, NiCrMo-9 falls under F45.
A Numbers are not applicable for non ferrous welds

No such condition as for P number/F Number should be same in Sec IX.

On Sat, Sep 18, 2010 at 6:38 PM, limesh M <limesh78@gmail.com> wrote:
Dear All,
 
I want to prepare a WPS for ,
 
material ASTM B 423 (P No-45).
 
Process - GTAW
Construction Code - ASME B31.3
Welding Code - ASME BPV SEC IX
 
What is the F - No. of ERNiCrMo-3?  43 or 45?One of the  WPS in my hand says 45 !!!
I have reviewed ASME BPV SEC IX QW 432,F-No. section and found that 43.Now I need clarification from experts,which one is correct 43 or 45?
 
What is the A - No. of ERNiCrMo-3? I have reviewed QW 422 A-Numbers section,but couldn't find.
 
Is there any condition that P- no. and F- no. shall be same?
 
Seniors, I need your help on this issue.
 
 
Regards,
 
Limesh

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...