Saturday, September 11, 2010

[MW:6952] Re: What is the consumables for following welding material

pl specify thk and design temperature to decide about the selection
of consumable. Incase PWHT is involved selection will change. what is
the code of construction?

On Sep 9, 12:39 pm, "r.kesav moorthi" <k7moor...@yahoo.co.in> wrote:
> Sir,
>
> I want to know the consumable for welding following materials
> 1.) 11Cr Cb+11Cr Cb- SMAW,FCAW,TIG,GMAW( Pre heat, PWHT & Consumable ).
> 2.) SA 387 Gr.11 + AISI 304-SMAW( Pre heat, PWHT & Consumable).
>
>  
> 175, R.Kesavamoorthi,
> Principal surveyor,
> Quest (pvt.) Ltd.,
> Ranipet.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...