Sunday, September 5, 2010

[MW:6874] why do we use high grades filler wire/electrodes

dear friends,
why do we use high grade filler wire/electrode by joing 2 pipes or
plates ,one is low grade like ss 304L and SS 316L ,WE use 316L filler
wire/electrode and by joining A106 Gr.B and A333 Gr.6 ,we use
E-7018-1.please explain it.thanks

Regards
M.Aslam Khan
QA/QC ENGINEER
DESCON ENGINEERING LTD.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...