Saturday, September 4, 2010

[MW:6862] Re: Weld joint efficiency

Dear Anoj

As per section VIII division 1 UW-12 gives the details of joint
efficiency for joints completed with Arc or Gas welding.

As per simple defination: Ratio of Strength of the Joint to Strength
of the base metal is known as joint efficiency.

As per code : JE depends on Type of joint & degree of examination of
the joint

In case of any equipment the joint efficiency of one joint does not
depend on the joint efficiency of any other joint.

You can refer Table UW-12 for the values of joint efficiency based on
the Full RT, Spot RT or No RT .

Best Regards

Jaspal Singh, CWI-AWS, CSWIP-3.1
Assistant Manager – Quality Assurance
Process Equipment Division
ISGEC, Yamuna Nagar, Haryana -135001
Phone: 911732307251
Ext: 251 Mb: +91 9996624244


On Sep 3, 7:13 pm, nayak singh <nayak...@yahoo.com> wrote:
> Dear all
> Can anybody explain that what is the weld joint efficiency and how will calculate
>
> Anoj singh
> Isgec haryana

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...