Saturday, September 4, 2010

[MW:6856] Thickness considerations when using E-6013 electrode in structure.

On referring, a reputed construction company's welding handbook it
mentioned about the usage of E 6013 electrode in load carrying & no
load carrying structures.

It is mentioned there "E 6013 electrodes can be used for all non –load
carrying welds of all thickness of IS-2062 plates (P1 group material
in Indian Standards) up to 20mm thick ness & 8 mm fillets". Please
see the file attached.

My doubts are…

In code where it is mentioned about the thickness considerations of E
6013 electrode when we are using in P1 group plates?

Is there any practice for selecting electrodes in load carrying
structures and no load carrying structures of P1 group?

Regards

Jose Sebastian

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...