Depends on applicable design code. Often this is specified, in some
cases it's also allowed to place such on a seam weld by using double
plates in order dividing the stresses to ensure that no high stress
locations are present straight on the weld cap.
Best Regards,
Herman Pieper
On 3 sep, 13:23, palanisamy shanmugam <shansam...@gmail.com> wrote:
> Dear all,
>
> Good day.
>
> Any one can help to get the information for the following requirments:
>
> What is the distance to maintained from Seam weld to support attachments
>
> Seam weld plate thinckness is 29mm. support thickness 12 mm plate which to
> be welded near the seam weld.
>
> Equipment : Gasoline Sphere Storage Tank
>
> thanks in advance.
>
> Regards
>
> Shan.Palanisamy
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment