Thursday, August 26, 2010

Re: [MW:6732] RE: 6684] Pipefitter calculator

I have working with automated sprinkler system especially working on the pipeline.  if more elbows come, have to prepare fabricated elbows with working knowledge on different angles manually without using any formulas or any guidance from them, so it take more time.  Could you suggest to ease out ?
 
 
 


--- On Wed, 25/8/10, Kristian Lund Jepsen (KUJ) <KUJ@ramboll.com> wrote:

From: Kristian Lund Jepsen (KUJ) <KUJ@ramboll.com>
Subject: [MW:6690] RE: 6684] Pipefitter calculator
To: materials-welding@googlegroups.com
Date: Wednesday, 25 August, 2010, 1:20 AM

If you don't have an estimation manual from a company, pls. refer to the following book:
John S Page: Estimator's Piping Man-Hour Manual
 
regards
Kristian


From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Jeganathan Gowtham
Sent: 24. august 2010 14:12
To: materials-welding@googlegroups.com
Subject: [MW:6684] Pipefitter calculator



Hi guys,

I am from india, chennai.  Anybody know about pipefitter calculator, pls tell me about that or any alternative accessories available in the market ?


--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...