Re: [MW:6589] Nozzle weld as per UW16.1 figure f-4 (weld metal build up)

On my opinion yes, but you have to consider the specific qualification requirements of the section IX for build-up (QW-202.3)

Dr. G. Dilintas - Authorized Inspector Supervisor
I&F Regional Technical Manager
Bureau Veritas Piraeus - Greece
Tel: +30 210 40 63 113/4
Fax: +30 210 40 63 118
Cell: +30 69 44 64 62 04
"Bathula Raghuram (Mumbai - PIPING)" <R.Bathula@ticb.com>

"Bathula Raghuram (Mumbai - PIPING)" <R.Bathula@ticb.com> Sent by: materials-welding@googlegroups.com 19/08/2010 08:43 Please respond to materials-welding@googlegroups.com

To "'materials-welding@googlegroups.com'" <materials-welding@googlegroups.com> cc Subject [MW:6580] Nozzle weld as per UW16.1 figure f-4 (weld metal build up) Ref

When a lip type joint is specified as per ASME Sec VIII div 1, UW16.1 figure f-4 (as below), can the lip be made with weld metal buildup?

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.