Tuesday, August 17, 2010

RE: [MW:6530] simulation treatment

Pl. refer UCS 85


From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Muhammed Ibrahim PK
Sent: Tuesday, August 17, 2010 9:16 AM
To: materials-welding@googlegroups.com
Subject: Re: [MW:6529] simulation treatment

Hi,
 
Simulation heat treatment is performing on sample piece of material to be used in production.
If the production required PWHT for 2 Hrs, do PWHT in the sample piece of the material for three cycle. ie 6hrs. then carry out the tensile test and hardness test & if applicable impact also.
 
If any production repair required we have to confirm the property of material is safe after multiple PWHT.

Thanks & Regards
Muhammed Ibrahim PK


On 16 August 2010 23:06, asad azmi <azmiasadayub@gmail.com> wrote:
Dear All,
 
Greetings.
 
what is simulation  Treatment and where it is applicable.
 
 Please  expalin with example in reference to ASME SEC VIII DIV 1/ASME SEC II
 
Thanks in advance.
 
Regards
 
Asad 


No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...