Re: [MW:6529] simulation treatment

Hi,

 

Simulation heat treatment is performing on sample piece of material to be used in production.

If the production required PWHT for 2 Hrs, do PWHT in the sample piece of the material for three cycle. ie 6hrs. then carry out the tensile test and hardness test & if applicable impact also.

 

If any production repair required we have to confirm the property of material is safe after multiple PWHT.

Thanks & Regards
Muhammed Ibrahim PK

On 16 August 2010 23:06, asad azmi <azmiasadayub@gmail.com> wrote:

Dear All,

 

Greetings.

 

what is simulation  Treatment and where it is applicable.

 

 Please  expalin with example in reference to ASME SEC VIII DIV 1/ASME SEC II

 

Thanks in advance.

 

Regards

 

Asad 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.